1. Material: aluminum alloy steel
2. Application: steel/aluminum alloy/titanium alloy front fork with an outer diameter of 26.8mm at the upper end (full carbon fiber front fork cannot be used)
3. Packing list: aluminum alloy sleeve x1 steel flower core rod x1 sun flower x1 holding screw x2
4. Features: simple operation automatic positioning of the left and right of the flower core and depth the sleeve edge is round and does not hurt your hands 304 stainless steel holding screws not easy to rust
5. Weight: about 245g/set
Installation notes:
1. After the front fork is cut off the vertical tube is squeezed by force and the edge is turned outward. Before driving into the sun flower use a file to polish the edge to prevent the sleeve from jamming.
2. Screw on the steel sunflower and screw it to the end
3. Put on the sleeve and prepare to drive in
4. Knock the ejector rod with a rubber mallet until it is flush with the sleeve
5. Remove the sleeve and ejector rod the installation is complete
